ANT1013/AC-FLEX813/AC-FLEX913 70℃ 300/500V Twisted Double Sheath Shielded Drag Chain Cable

Widely used in automated CNC processing as well as servo motors or servo encoders and other drag chain systems for signalling and control use. EMC compliant copper wire shielding to prevent electromagnetic interference. Can also be used in dry and humid indoor and outdoor environments as well as in areas such as cranes and conveyor facilities and in automated production processes for data transmission, measurement, feedback, encoders, resolvers, tachometers, signals and system applications.

Oil resistant according to DIN EN 60811-4044 hrs +100°C

UV, ozone and weather resistant according to EN 50396 and HD 605 S2

Resistant to coolants, microorganisms, weak acids and alkalis

RoHS compliant

UL, CUL compliant

CE compliant according to 2014/35/EU-Guideline ("Low Voltage Directive").

Conductor material: Bare copper

Conductor class: DIN VDE 0295 Class 6 conductor or IEC 60228 Class 6 conductor.

Core insulation: PVC-J-105-003(2105-LF)

Core marking: <0.5 mm²: 5 cores and below with colour separation, in accordance with n,DIN 47100, more than 5 cores of multi-core cables with colour separation of core wires and white ink marking; ≥0.5 mm²: 5 cores and below with colour separation, including yellow/green ground wires, in accordance with n.DIN 47100, more than 5 cores of multi-core cables with black core wires and white ink numbering (if any). special requirements on request)

Power cable: black jacket with white printing U/L1:W/L2:W/L3:GN/PE

Cable Formation:Every two cores are twisted with short pitch, then all the twisted wires are twisted together with short pitch around the wires.

Inner sheath:DQPVC-H-90-003(9039-LF)(PVC filler)

Shield: Tinned copper wire braid shielding Shield density>80%6

Sheath: DQPVC-H-90-003(9039-LF) low loss, cut resistant, low adhesion

Sheath colour: black (RAL 9005); grey (RAL 7001); orange (RAL 2004); green (RAL 6018)

Rated voltage:≥25:0.6/1KV; 0.75-16:300/500V; ≤0.5:300/300V

Test Voltage:3500V; 2000V; 1500V

Conductor resistance:+20°C Conforms to DIN VDE 0295 Class 6 conductors or IEC 60228 Class 6 conductors.

Minimum bending radius Fixed:4xd

Minimum bending radius Travelling: 7.5 xd

Travelling speed: self-supported: max.8 m/s, gliding: max.5 m/s

Cable length: self-supporting/gliding max.400 m

Acceleration: max.100 m/s².

Bending cycle:<35 cycles/min.   life>8 million times

Operating temperature Fixed min/max:-30°C/+100°C(UL: 90°C)

Operating Temperature Mobile Minor/Major:-30°C/+100°C (UL: 90°C)

Flame Retardant Rating:Conforms to IEC 60332-1-2;UL/CUI FT1, FT2

Certification:CE;UL/CUL UL certification is required.