Excavation and dredging cables IS

Due to their extremely low water absorption,  this cables can be used in fresh or salt water. These medium voltage cables are used to supply power to excavation vessels on the shoreline of a large gravel quarry or quarry. A pair of shielded wires is placed in the gap to provide the control signals: two earth wires are placed in the other side of the gap.

Flame retardant according to EN 60332-1-2; IEC 60332-1-2.

Resistant to abrasion and tearing, oil and ozone.

Special constructions, other sizes, core and jacket colours are available on request.

ROHS compliant

Conforms to the 2014/35/EU-Code (Low Voltage Directive) CE.

Conductor: Flexible bare copper conductor class 5 IEC60228

Reinforcement: Polyarylamide

Conductor shielding: semi-conductive layer

Insulation: EPR ethylene propylene rubber IEC60502-2

Individual shielding: Bare copper wire with semi-conductive wrapping

Core identification: blue - white - red Ground: yellow-green, or digital numbering

Inner jacket: special thermoplastic compound.

Shield (2x2.5mm²): flexible copper conductor class 5 IEC60228, bare copper wire XLPE cross-linked polyethylene, special thermoplastic compound

Earth wire: two, class 5 IEC60228, XLPE cross-linked polyethylene insulation

Sheath: polyurethane

Colour: orange Other colours on request

Minimum bending radius fixed: 10xd

Minimum bending radius mobile: 18xd

Temperature rating Fixed:-30°C/+90°C

Temperature class Mobile:-15°C/+90°C

Flame rating: IEC 60332-1