NHXMH-O/-J300/500V Low Smoke Halogen Free Control and Power Cable

Halogen-free plastic sheathed cables with enhanced fire characteristics are used in applications where it is essential to prevent casualties and property damage in the event of a fire, such as industrial facilities, public utilities, hotels, airports, underground stations, railway stations, hospitals, department stores, banks, schools, theatres, multi-storey buildings, and process control. Suitable for installation in dry, damp or wet environments and can be installed above, on, in and under plaster as well as in internal masonry walls and concrete, but cannot be embedded directly in vibrated, compacted or tamped concrete.

Non-flammable

Low smoke and halogen free

No corrosive or toxic gases

Ozone resistant

ROHS compliant

CE marking = product conforms to EC Low Voltage Directive 2006/95/EG

Conductor material: Bare copper wire; single or multi stranded

Insulation: Cross-linked polyethylene (XLPE) core insulation

Insulation colour: 1 core: black or green-yellow ≤ 5 cores: coloured 26 cores: black with continuous white numbering

Inner sheath: Filled compound core sheath (can be omitted for single core cables)

Outer sheath: Halogen free polymer composite HM2 type outer sheath according to HM2 standard.

Sheath colour: grey (RAL 7035)

Rated voltage: 300/500V

Test voltage: 2000V

Minimum bending radius for fixed installation: 4xD

Temperature range during installation: +5°C to +70°C

Conductor temperature during operation +70°C: +250°C in case of short circuit

Halogen free: according to IEC 60754-1

Flame retardant: according to IEC 60332-3

Oxygen Resistant: according to IEC 60811-403.