Single wire hoist handle cable RVV1G

Electric hoist and arm controller connecting cables are widely used in dry or wet indoor, can be forced to guide the left and right non-continuous movement of the installation, such as electric hoist, travelling crane and detection equipment, self-supporting shaft or tilting shelves, cranes, harbours and other occasions. The outer sheath can be customised according to different climatic conditions and use occasions, so the product can also be used in the open air.

Wear-resistant

Oil and water resistant

High tensile strength

Special constructions, other sizes, core and jacket colours are available on request.

Conductor Material: Multi-stranded fine stranded oxygen-free bare copper wire; conforms to VDE0295 CLASS5 or 6.

Insulation: High quality mixed elastomer nitrile material soft insulation

Colour coding: Colourful core wire or black body with white numbering, 3 cores or more with yellow/green earth wire.

Reinforcement: Multi-strand jute rope filling, one or two self-sustaining wires without torque to carry the running tension.

Core structure: anti-twist structure layered

Lining layer: flexible non-woven cloth cushioning of the wire body

Sheath material: special blend of weather-resistant elastomer nitrile material

Sheath colour: black (RAL9005) grey (RAL7001) orange (RAL2003)

Rated voltage:≤1.5mm2:300/500V, >1.5mm2:450/750V

Test voltage: ≤1.5mm2:2500V, >1.5mm2:3000V

Minimum bending radius: Fixed laying:10xD(cable O.D.); Mobile laying:12xD(cable O.D.).

Mobile laying:12xD(cable outer diameter).

Operating temperature: Fixed laying: -30℃ to +80℃; Mobile laying: -30℃ to +80℃.

Mobile laying:-20℃ to +80℃(-55℃ to +105℃)

Radiation Resistance:8x107cJ/kg

Flame Retardant:Comply with IEC60332-1