（CE）Signal Shielded Drag Chain Cable AC-FLEX802 Special Cables

Widely used in automation CNC processing, servo system, drag chain system signal and control use. EMC compliant copper wire shielding to prevent electromagnetic interference. Suitable for dry and humid indoor and outdoor environments as well as cranes and conveyor facilities. Also suitable for data transmission, measurement, feedback, encoders, resolvers, tachometers, signalling and system applications in automated production processes.

Oil resistant（DIN EN 60811-404 4 hours +100°C）

UV, ozone and weather resistant （EN 50396 and HD 605 S2）

Resistant to coolants, microorganisms, weak acid and alkali

RoHS 、UL、CUL

2014/35/EU-Guideline (Low Voltage Directive) CE

Conductor material: bare copper

Conductor class: Class 6 conductor according to DIN VDE 0295 or IEC 60228 Class 6 conductor

Core insulation: PVC-J-105-003 (2105-LF)

Core marking: <0.5 mm²: 5 cores and less are distinguished by colour separation in accordance with n.DIN 47100, more than 5 cores of multi-core cables are distinguished by core colour separation. White ink marking; ≥0.5mm²: 5 cores and below with colour separation, including yellow/green ground wire, in accordance with n. DIN 47100, more than 5 cores of multi-core cables with black core and white ink numbering (if there are special requirements on demand)

Power cable: black jacket with white printing U/L1；V/L2；W/L3；GN/PE

Cable formation:  core <10: core with short pitch stranding

                             core ≥11: core with two double stranding

Shielding: tinned copper wire braid shielding Shielding density ≥ 80%

Sheath: DQPVC-H-90-003(9039-LF) Low abrasion, cut resistant, low adhesion.

Sheath colour: black (RAL 9005)  grey (RAL 7001)  orange (RAL 2004)  green (RAL 6018)

Rated voltage: above 25: 0.6/1kV   0.75-16: 300/500V    0.5 and below: 300/300V

Test voltage: 3500V   2000V   1500V

Conductor resistance: +20°C in accordance with DIN VDE 0295 Class 6 conductors or IEC 60228 Class 6 conductors

Minimum bending radius Fixed laying value: 4 x d

Minimum bending radius Mobile laying value: 7.5 x d

Travelling speed: self-supporting: max. 8m/s       gliding: max. 5m/s

Wire length: self-supporting/gliding： max. 400m

Acceleration: max. 100m/s²

Bending cycle: <35 times/min.       life>8 million times

Operating temperature Fixed small value/large value: -30℃/+100℃ (UL: 90℃)

Operating temperature Mobile small value/large value: -30℃/+100℃ (UL: 90℃)

Flame retardant grade: Comply with IEC 60332-1-2;  UL/CUI FT1, FT2

Certification: CE; UL/CUL （If UL certification is required, separate certification is required）