(CE & UL) Sensor Signal 1789 CP Copper Core PVC Sheathed and Insulated Highly Flexible Bend Resistant Shielded Decoder Cable

 Sensor Signal 1789 CP is widely used in automated CNC machining as well as low capacitance feedback, encoders, resolvers, speed sensors, signals and systems for signalling and control use in drag chain systems. EMC compliant copper wire shielding prevents electromagnetic interference.

Oil resistant Conforms to DIN EN 60811-404 4 hours +100°C;

UV, ozone and weather resistant Conforms to EN 50396 and HD 605 S2

Resistant to coolant, microorganisms, weak acids and alkalis.

RoHS，UL, CUL compliant

2014/35/EU-Guideline (Low Voltage Directive)CE

Conductor material: bare copper

Conductor type: DIN VDE 0295 Class 6 conductor or IEC 60228 Class 6 conductor

Core insulation: PVC-J-105-003 (2105-LF)

Core identification: <0.5 mm²: 5 cores and below with colour separation in accordance with n.DIN 47100, more than 5 cores of multi-core cables with colour separation of cores and white ink marking; ≥0.5 mm²: 5 cores and below with colour separation including yellow/green ground wire in accordance with n.DIN 47100, more than 5 cores of multi-core cables with black cores and white ink numbering (if any special requirements on request)

Shield: tinned copper wire braid shielding     Shield density ≥80%.

Sheath: DQPVC-H-90-003(9039-LF)

Sheath colour: black RAL9005; grey RAL7001; orange RAL2004; green RAL6018

Rated voltage: 30/300V

Test voltage: 500V, 1500V

Conductor resistance: +20°C Conforms to DIN VDE 0295 Class 6 conductors or IEC 60228 Class 6 conductors

Minimum bending radius fixed laying value: 4x d

Minimum bending radius moving laying value: 7.5x d

Travelling speed: self-supporting: max. 8m/s;     gliding: max. 5m/s

Conductor length: self-supporting/gliding max. 400m/s

Acceleration speed: max. 100m/s²

Bending cycle: <35 times/min.     life>5 million times

Operating temperature Fixed small/large value: -50°C/+80°C

Operating temperature Mobile small/large value: -40℃/+80

Flame Retardant Grade: IEC 60332-1-2; UL/CUL FT1, FT2

Certification: CE; UL/CUL       UL certification is required to be indicated separately.